Eurocom P5 Pro - Manual (Page 149)

Modules
Setting Up SATA RAID or AHCI Mode 6 - 7
6
17. You should select two identical hard disks/SSDs to form your RAID volume.
18. If you have selected RAID0 (Stripe) then you can adjust the “Strip Size” to your
requirements.
19. Go to Create Volume and press .
20. The RAID volume will then be created and the RAID information will be displayed
under Intel(R) Rapid Storage Technology (in the Advanced menu).
21. Press to exit the menu.
Figure 6 - 4
Created RAID
Information
(Advanced > Intel(R)
Rapid Storage
Technology)