Eurocom M735T Puma - Manual (Page 42)

Concise User’s Guide
36 - Intel Turbo Memory Module
English
Intel Turbo Memory Module
If you have included an Intel Turbo Memory (Robson)
module
in your purchase option, then you will need to
install the driver as per the instructions below (do not
install this driver in Windows XP).
Intel Turbo Memory Technology (also known as Rob-
son flash memory) is an Intel technology that reduces
the time it takes for a computer to boot up, to load appli-
cations, and to write data to the hard drive. Intel Turbo
Memory Technology is supported in Windows Vista only
(it also supports Windows Vista features such as Ready-
Boost, ReadyDrive, and Superfetch).
Intel Turbo Memory Setup and Driver
Installation
1. Start-up the computer and press F2 to enter the BIOS.
2. Go to the Advanced menu, select "Installed O/S" and
make sure "Vista" is the selected option.
3. Go to the "SATA Mode Selection" item and make sure
"AHCI" is selected.
4. Go to the Exit menu and select "Exit Saving Changes"
(or press F10 and select "Yes" then press Enter) and
press Enter to exit the BIOS and reboot the computer.
5. Insert the Device Drivers & Utilities + User’s Manual
disc into the CD/DVD drive.
6. Click Option Drivers (button).
7. Click 5.Install TurboMemory Driver > Yes.
8. Click Next > Yes > Next > Next.
9. Click Finish to restart the computer.
Figure 25 - Intel Turbo Memory Console
• Windows ReadyBoost - uses flash memory as a hard-
drive caching solution.
• Windows ReadyDrive - uses hybrid drives as a hard-
drive caching solution.