Eurocom M735T Puma - Manual (Page 38)

Concise User’s Guide
32 - 3.5G Module
English
Connecting to the Service Provider
1. Power on the 3.5G module using the Fn + key combi-
nation (the icon will be green).
2. You can access the 3G Watcher application from the Start
menu (Start > Programs/All Programs > Sierra
Wireless > 3G Watcher), or by clicking the icon
.
3. The software will run and display the service provider name
(connection information is obtained from the USIM card).
Figure 19 - 3G Watcher
4. Click Connect to begin the connection process.
5. The 3G Watcher application will then display the
connection information in the window.
Figure 20 - Connecting
6. When the connection is successful a taskbar notification
will appear (as below).
Figure 21 - Connected Taskbar Notification
7. You can then access the internet, download e-mail etc. as
per any internet connection.
8. While you are connected the taskbar icon will be green
(it will be red when the program is running but not
connected).
9. To disconnect click the Disconnect icon.
Figure 22 - 3GWatcher Connected
10. The program will disconnect from the service provider.
11. The module will still be on, and you will need to press the
Fn + key combination (the icon will be off when
disconnected).