Echelon Rapid Deployment Example for EES - Manual (Page 28)

18 Using the Rapid Deployment Example
3. This Web page displays the current HVAC mode, setpoint, and temperature (the setpoint and
temperature are displayed in degrees Celsius). You can use the Knob object to adjust the setpoint.
4. Optionally, you can view details of the HVAC system by clicking the Zone HVAC Details link in
the upper right-hand corner of the Web page.
5. A Web page opens displaying the current mode, occupancy state, setpoint, temperature, and status
of the HVAC system in the respective zone. The setpoint and temperature are displayed in
degrees Celsius.
6. You can manually control the HVAC system by adjusting the Mode, Occupancy, and Setpoint
properties. For example, you can turn on the hypothetical air conditioning unit for the zone by
setting the Mode property to HVAC_COOL, or you can adjust when the hypothetical air
conditioning and heating units are turned on and off by adjusting the setpoint.