Echelon Rapid Deployment Example for EES - Manual (Page 13)

Rapid Deployment Example for EES 3
After you assemble and wire the demonstration network, you can install the Echelon Enterprise
Services 2.0 from the i.LON SmartServer 2.0 DVD, and then import and deploy the provided i.LON
template for the demonstration network using the i.LON AdminServer.
After the i.LON template has been deployed, you can open the SmartServer home page and click a link
to access the custom Web pages provided for the demonstration network. You can use these Web
pages to monitor and control the lighting and HVAC systems in the demonstration network, and
monitor the network’s energy consumption.
To create and use the demonstration network, you do the following:
1. Order the specified devices included in the i.LON template.
2. Assemble and wire the specified devices.
3. Install Echelon Enterprise Services 2.0 software, and install LNS Server Service Pack 5 if you are
using LNS management services.
4. Import the included i.LON template.
5. Deploy the included i.LON template to your SmartServer. Optionally, you can open a LonMaker
drawing for the demonstration network if you are using LNS management services.
6. Monitor and control the network using the provided custom Web pages.