Procedure, Rt115q operator’s manual – Ditch Witch RT115 Q User Manual
Page 80
RT115Q Operator’s Manual
Transport - 79
Tow
CMW
Tow
Under normal conditions, tractor should not be towed. If tractor becomes disabled and towing is
necessary:
•
Do not tow for more than 200 yd (180 m).
•
Tow at less than 1 mph (1.6 km/h).
•
Steering will be very difficult.
Procedure
1.
Engage parking brake.
2.
Block front and rear tracks to prevent unit
from rolling.
3.
Attach tow line to all available tie-down
points facing towing vehicle.
4.
Activate the tow valve (shown).
•
Remove floor plate.
•
Locate two hex-shaped relief valves.
•
Turn each valve (whole hex)
counterclockwise three complete
revolutions.
•
Replace floor plate.
5.
Remove blocks.
6.
Fasten seat belt and adjust seat belt.
7.
Disengage parking brake.
8.
After towing, turn tow valve clockwise three complete revolutions.
Incorrect procedures could result in death, injury, or property damage.
Learn to use equipment correctly.
NOTICE: Do not turn tow valve
more than three revolutions.