Ditch Witch RT115 Q - Manual (Page 30)

RT115Q Operator’s Manual
Controls - 29
Center Console
CMW
3. Drilling attachment
control To rotate clockwise, press
top.
To rotate counterclockwise,
press bottom.
Switch returns to neutral
when released.
NOTICE: Always rotate clockwise
during drilling and backreaming.
Rotate counterclockwise only to
dislodge a dry bore bit or reamer that
has seized in the bore hole.
For more information about drilling
attachment, see page 109.
4. Ignition switch To start engine, insert key and
turn clockwise.
To stop engine, turn
counterclockwise.
If engine does not start on first
attempt, check that all interlock
requirements have been met, return
switch to STOP, and try again.
5. Ground drive foot
control To move tractor forward, push
top of pedal.
To move tractor backward,
push bottom of pedal.
To increase speed in either
direction, push pedal farther
from center.
To reduce speed in either
direction, release pedal.
Pedal should automatically return to
neutral when released.
For more information, see page 66.
6. Steering column tilt
control To adjust tilt, pull.
To secure steering column in
position, release.
Item Description Notes
c00ic218h.eps
c00ic217h.eps