Digicom COMSPHERE 3910 User Manual

Page 187

Remote Branch

13-3

3910-A2-GN32-40

September 1998

For Trellis Multipoint (TMp) control modems, you must specify the network management
address of a tributary modem. The following display does not appear in point-to-point or
Trellis Multipoint tributary modems.

Choose Address:
Ent

xxx

The address field (xxx) displays the network management address of the modem to be accessed
by the Remote function. The valid address field range is from 001 to 256.

To increment digits within the address field (xxx), use the

and

keys to position the

cursor ( _ ) under the digit that will be incremented. Press the F2 (

" ) key to increment the digit.

Press Enter (Ent) to select the modem that will be accessed by the Remote function.

For Trellis Multipoint (TMp) modems (control or tributary), you must specify the remote access
password of the modem that will be accessed by the Remote function. The following display
does not appear in point-to-point modems.

Choose Password:
Ent

yyyyyyyy

The password field (yyyyyyyy) displays the remote access password of the modem to be
accessed by the Remote function.

To increment digits within the password field (yyyyyyyy), use the

and

keys to position

the cursor ( _ ) under the digit that will be incremented. Press the F2 (

" ) key to increment the

digit.

Press Enter (Ent) to select the modem that will be accessed by the Remote function.

Select Channel

Secondary

Select Channel

Prim (data blckd)