Digicom COMSPHERE 3910 - Manual (Page 173)

Dial Access Security
12-11 3910-A2-GN32-40 September 1998
Set Admin PsWd
Set Administrative Password is used to change the Administrative Password value. The
Administrative Password is an 8-digit decimal number that allows authorized users to enter the
Access Security Control function.
NOTE
If this value is forgotten, then the only way to access any of the
security functions is by selecting Reset Security. This restores the
password to a known value, but erases the contents of the modem’s
security database
.
To change the Administrative Password, make the following selections:
F1
Set Access Ctrl <
Set_Admin_PsWd
F2 F3
Press until Set_Admin_PsWd appears.
Select Set_Admin_PsWd.
F1
Set Admin PsWd
Ent
" 00000000
F2 F3
The Administrative Password appears.
Press the F2 (
" ) key to increment password values.
Press the key to move the cursor to the next position. Continue this sequence until the new
password value is entered.
Press the F1 key to save the new password value.