Dial – Digicom COMSPHERE 3910 User Manual

Page 150

COMSPHERE 3900 Series Modems

10-2

September 1998

3910-A2-GN32-40

To access the Call Setup branch from the Top-Level menu, make the following selections:

Leased:19.2
Call_Setup

Press the

key until Call_Setup appears. Select Call_Setup.

Dial

For dial backup applications, Dial allows you to dial any telephone number stored in directory
locations 1–24. Any telephone number dialed using the DCP must already exist in a directory
location. Refer to Change Directory on page 10-6 for information on storing telephone numbers
in directory locations.

For leased backup applications, Dial allows you to switch to the backup leased line. Any
directory location may be used. The remote modem cannot automatically answer the simulated
call. Use the Answer function of the remote modem in conjunction with the Dial function to
manually switch to the backup leased line.

To access Dial from the Call Setup branch, make the following selection:

Call Setup:

Dial Disconnect

Select Dial to display the first directory telephone number.

DialDirectory:
Nxt 01:5551234

To view other directory locations, select Nxt.

DialDirectory:
Nxt 02:5461879