Digicom SNM50 - Manual

P
S
T
N
M
odem /F
a
x
SNM50 05/11/98
THIS DOCUMENT IS SUBEJCT
TO CHANGE WITHOUT NOTICE
digicom S.p.A.
-ITALY- 21010 Cardano al Campo VA via Alessandro Volta 39
Tel. +39/331/702611 - Fax +39/331/263733 - http://www.digicom.it
Telematics
SNM50
V34+ (33.6) professional modem
SNM50 modem and its card version SNM54 for RMC2x
Switched HUB, are high performing telematic solutions for
data transmission in all professional applications; they have
been projected to suit with any information system, from
Personal Computers to MacIntosh systems, to Local Network
Servers or Unix or Mainframe and allow communications up
to 33.600 bps on any switched or 2 and 4 wires leased line,
both for local and long distance lines.
Thanks to the supported modulation standards SNM50 is a real
multistandard, which is able to communicate with any other
modems in conformity with ITU-T regulations; it works in full/
half duplex with V13 support and also in digital multipoint
applications.
It’s perfect for all synchronous and asynchronous applications,
client side or server side; SNM50 has got special features
that allow to solve applicative problems other modems can
hardly work out:
automatic back-up and restore of point to point and multipoint
leased connections
back-up management on modems pull
clock/calendar
programmable agenda
internal telephone book
security management with programmable procedures and password
dial-in/dial-out management client and server side
client and server side call back
client and server side extended call back
100 items of telephone book associated to security, call back and
special programmings
20 programmable configurations in memory
character teleprogramming
tele download of complete configuration
management by digicom MSS01 for back-up-restore
and dial-in/out applications
V54 diagnostic
flash eprom for upgrade of new functions
AT call compatible with extended command set
V25bis HDLC call mode with ASCII codes (for AS400 and IBM
Mainframe)
asynchronous working from 300 to 33600 bps with all formats up to
11 bit
synchronous working on all speeds from 1200 to 33600 bps
auto-adapting line speed according to error rate
main and command port for special dual DTE applications
(through proper cable)
SNM50 is a modem growing according to the
customer’s needs; it is compatible with SLIP and
PPP applications in Internet but also with access
solutions to private networks with Remote Access
Server of Windows NT or similar solutions in
Novell, Unix and IBM AS400 or Mainframe
environments.
The rack Switched HUB with SNM54 is a very good
solution for Internet Provider thanks to its multistandard
support up to 33600 bps.
In 5250(AS400) or 3270(Mainframe) synchronous environments,
the product can support both switched applications and leased
ones with back-up and management.