Digicom COMSPHERE 3910 - Manual (Page 117)

Poll List Branch
6-3 3910-A2-GN32-40 September 1998
If there are modems in the poll list when you select Display,
xxx Displays the network management address of the modem in the poll list.
yyyyyy Displays either Active or Skip to indicate the poll list in which the network
management address is included.
Select Nxt to scroll through the entries in the Active or Skip poll lists.
To exit this function and remain in the PList Display branch, press the key. To exit and
return to the Top-Level menu, press the key.
Clear
The Clear function does not appear in Remote mode.
Clear deletes the modem’s poll list.
To access Clear from the PList branch, make the following selection:
F1
Poll List: >
Display Clear
F2 F3
Select Clear.
The message Command Complete appears on the second line of the LCD to indicate that the
poll list has been cleared.
To exit this function and remain in the PList branch, press the key. To exit and return to the
Top-Level menu, press the key.
Change
The Change function does not appear in Remote.
Change allows you to change the modem’s poll list.
To access Change from the PList branch, make the following selections:
F1
Poll List:
Clear
Change
F2 F3