AMT Datasouth 2012 M6 Plus - Manual (Page 61)

3.1.4 Ethernet
Use this menu to configure internal Ethernet configuration check the printer’s Ethernet module
status, and reset the Ethernet module. This function is available on the LCD display when Ethernet
card is installed.
Press and buttons to select the different options and press button to
enter the option. Press key to cancel the setting and return to the previous menu.
Exit
Ethernet
Status Configure
↓ ↓
IP Address DHCP
↓ ↓
MAC Static IP
↓ ↓
Exit Exit
3.1.4.1 Status: (IP Address / MAC)
Use this menu to check the Ethernet setting status.
3.1.4.1.1 IP Address
Status 1/3
> IP Address
MAC
Exit
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway
0.0.0.0
Ethernet 1/3
> Status
Configure
Exit
The IP address information will be shown on the LCD display. Please press or
button to return to the previous menu.
55