AMT Datasouth 2012 M6 Plus - Manual (Page 46)

3.1.1-2.12 Delimiter Char:
40
This option is used to set delimiter character. Press the button to move the cursor
from left digit to right digit, and press the button to set the value from “0” to “9” or “A” to
“F”. Press the button to set the value into printer. Press key to cancel
the setting and return to the previous menu.
3.1.1-2.13 Media Power Up:
Print Setup 12/17
Control Prefix
Format Prefix
> Delimiter Char
Delimiter Char
<
, > 2CH
Print Setup 13/17
Format Prefix
Delimiter Char
> Media Power Up
Media Power U 4/5
Length
> No Motion
Exit
This option is used to set the action of the media when you turn on the printer. Printer default
setting is No Motion. When enter this list, the print mode in the right side of “ >” icon is the
printer current setting. Press and to select the different print mode and
press button to enable the setting. Press key to cancel the setting and
return to the previous menu.
Selections Description
Feed Printer will advance one label
Calibration
Printer will calibration the sensor levels, determine length and
feed label
Length Printer determine length and feed label
No Motion Printer will not move media