AMT Datasouth 2012 M6 Plus - Manual (Page 18)

12
2.3.2 LED Indicators
LED Status Indication
Off The printer power is turned off
POWER
On The printer power is turned on
On Printer is ready
Pause ON-LINE
Blinking
Downloading data into printer
Off Printer is ready
On “Carriage open”, “Cutter error” or “Clearing data” ERROR
Blinking “No paper”, “Paper jam” or “No ribbon”
2.4 Setting up the Printer
1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the provided USB cable.
4. Plug the power cord into the AC power cord socket at the rear of the printer, and then plug the
power cord into a properly grounded power outlet.
Note:
Please switch OFF printer power switch prior to plug in the power cord to printer power jack.