AMT Datasouth 2012 M6 Plus User Manual

Page 55

Bline Size

0024 dot

2. Press the

button to move the

cursor from left digit to right digit, and press
the

button to set the value from “0” to

“9” and the “dot/ mm/ inch”. Press the

button to set the bline size into the

printer.

Bline Mode

Scan Mark

Intensity x

Ref. Level xxx

3. Open the print head mechanism, put the black

mark under the media sensor. Press the

button to set the value into the

printer.

Bline Mode

Scan Paper

Intensity x

Ref. Level xxx

4. Then, put the label without black mark under

the media sensor. Press the

button to set the value into the printer.

Note:
Normally, the value of “Ref. Level” for mark should be larger than paper for over
128. If the media sensor fails to do so, you have to manually change the
Intensity by pressing

and

to reach the above value.

Bline Mode

Complete

Intensity x

Ref. Level xxx

5. The bline sensor calibration is complete.

Press the

button the LCD screen

will return to the previous menu.

Media sensor

Black mark

Media sensor

Label without black mark