AMT Datasouth 2012 M6 Plus - Manual (Page 36)

The direction setting value is either 1 or 0. Use this option to setup the printout direction. Printer
default printout direction is DIRECTION 0.
Press key to set the direction as 1, and to set it as 0, and key to
enable the setting. Press key to cancel the setting and return to the previous
menu.
The following 2 figures are the printouts of DIRECTION 0 and 1 for your reference.
DIRECTION 0 DIRECTION 1
Note: If printing from enclosed software/driver, the software/driver will send out the
DIRECTION 0 command, which will overwrite the setting set from the front panel.
3.1.1-1.4 Print Mode: (None/Batch Mode/Peeler Mode/Cutter Mode/Cutter Batch)
30
This option is used to set the print mode. Printer default setting is Batch Mode. When enter this
list, the print mode in the right side of “ >” icon is the printer current setting. Press and
to select the different print mode and press button to enable the setting.
Press key to cancel the setting and return to the previous menu.
Printer Mode Description
None
Next label top of form is aligned to the print head burn line
location. (Tear Off Mode)
Print Setup 4/12
Density
Direction
> Print Mode
Print Mode 2/6
> Batch Mode
Peeler Mode
Cutter Mode