American Energy Systems Catalytic BBF - Manual (Page 39)

39
13
It is important for the homeowner to understand what happens in the event enough combustion air is not available
to a catalytic stove. Poor combustion, dirty chimney systems, and overall reduced performance will occur if an adequate
volume of combustion air is not available during stove operation. Consult with a certified professional to ensure a specific
home has both balanced and positive amounts of air present during stove operation.
CARE OF STOVE GLASS
All Country Flame stoves use high temperature ceramic glass that is rated to 1400°F. If the glass should crack or break for
any reason, it must be replaced with an equal or better grade ceramic glass. NOTE: THE MOST COMMON CAUSE OF
GLASS DAMAGE IS DUE TO OVER TIGHTENING THE GLASS CLIPS THAT HOLD THE GLASS IN THE
DOOR. The use of tempered glass or ordinary glass IS NOT AUTHORIZED for use in any Country Flame stove and is
hazardous if used. All Country Flame stove replacement glass can be purchased from the Country Flame or through a
local authorized dealer. DO NOT OPERATE any stove with a cracked or broken door glass or with a stove door in the
open position.
GLASS REPLACEMENT
If a door glass should crack or break for any reason, it must be replaced with an equal or better grade ceramic glass. Refer
to FIGURE 18, remove the glass clips with a common household screwdriver, and store both the screws and glass clips in
a safe place. These items will be required during reassembly so any damaged or worn items should be ordered and
replaced to ensure the glass and door properly fit together. The use of tempered glass or ordinary glass IS NOT
AUTHORIZED and is hazardous to use. Refer to APPENDIX A for the specific part number and a specific size of glass
for a specific model catalytic stove. Be prepared to provide the stove model number, stove serial number, the glass part
number, and whether etched or non-etched glass is required when reordering. Cutting or trimming the replacement glass
is not required. Replacement glass should fit into a specific catalytic stove door without any modification. Replacement
glass can be purchased from Country Flame or a local authorized dealer. It is important that when glass or any other stove
component is replaced that reinstallation of said component(s) include the proper gaskets and clearances provided when
the stove was originally manufactured.
If there is any question about installation procedures, proper clearances, required gasket material, or the latest techniques
in maintaining a stove in perfect operating condition, please contact Country Flame or one of its local authorized dealers.
GLASS-CERAMIC SPECIFICATIONS
Manufacturer: Euro Kera Window Type: Glass-Ceramic, Kera Lite®
KERA LITE® glass-ceramic has a thermal endurance far exceeding that of normal tempered glass. KERA LITE® is
designed to operate at temperatures ranging from -400
0
F to +1400
0
F. Despite its superior thermal properties, KERA
LITE® stove windows should be treated with care. This glass-ceramic can still be scratched or broken by mechanical
abuse. When cleaning the window, use only non-caustic, nonabrasive cleaners. Country Flame uses KERA LITE®
glass-ceramic that is 0.197 inches thick +/- 0.008 inches. The KERA LITE® glass is custom cut to fit Country Flame
stoves. If problems occur with stove glass, contact Country Flame or an authorized local Country Flame dealer for