ADLINK nanoX-TC - Manual (Page 50)

nanoX-TC User’s Manual Page 50
Save Changes
When you have completed the system configuration changes, select this option to save your
system configuration and continue. For some of the options it required to reset the system to
take effect. Select YES to Save Changes and continue.
Discard Changes
Discard any unsaved changes
Restore Defaults
Restore standard default values for all the setup options.
Save as User Defaults
Save the changes made so far as User Defaults.
Restore User Defaults
Restore the User Defaults to all the setup options.
Boot Override
Use the up/down arrow keys to highlight a boot device or "Launch EFI Shell" to immediately
exit the BIOS Setup and boot from the selected device.