ADLINK nanoX-TC - Manual (Page 34)

nanoX-TC User’s Manual Page 34
8.4.1 ACPI Settings
CPU Configuration Settings
You can use this screen to select options for the ACPI Configuration Settings. Use the up and
down < Arrow > keys to select an item. Use the < + > and < - > keys to change the value
of the selected option. A description of the selected item appears on the right side of the
screen. The settings are described on the following pages. An example of the ACPI
Configuration screen is shown below.
Enable APIC Auto Configuration
BIOS ACPI Auto Configuration. Set this value to Enabled/Disabled.
Enable Hibernation
System ability to Hibernate (OS/S4 Sleep State). Set this value to Enabled/Disabled.
ACPI Sleep State
Selects the highest ACPI sleep state the system will enter, when the SUSPEND button is
pressed. Set this value to S3/Suspend Disable.
S3 Suspend to RAM (STR) - Under this setting the system enters a low power state instead
of being completely shut off. This allows the computer system to boot up in a few seconds.