Remote access configuration, Remote access, Serial port number – ADLINK cPCI-6870 User Manual

Page 87

Text mode
Original mode

BIOS Setup Utility

cPCI-6870

Remote Access Configuration

Remote access configuration provides the settings to allow remote
access by another computer to get POST messages and send
commands through serial port access.

Remote Access

Select this option to Enable or Disable the BIOS remote access
feature.

Serial Port Number

Select the serial port you want to use for the remote access
interface. You can set the value for this option to COM1 or
COM2.

NOTE:

Enabling Remote Access requires a dedicated serial port connection.
Once both serial ports are configured to disabled, you should set this
value to Disabled or it may cause abnormal boot.