ADLINK cPCI-6870 - Manual (Page 69)

Driver Installation 55
cPCI-6870
6 Driver Installation
The cPCI-6870 drivers can be found on the ADLINK All-In-One
CD at X:\cPCI\cPCI-6870\, the cPCI-R6001(D) drivers can be
found at X:cPCI\cPCI-R6001(D)\, or from the ADLINK website
(http://www.adlinktech.com). ADLINK provides validated driv-
ers for chipset, graphics, LAN, and SATA/AHCI on Windows XP
Professional, Windows XP x64 Edition and Windows Vista x64
Edition.
6.1 Driver Installation Procedure
Install the Windows operating system before installing any driver.
Most standard I/O device drivers are installed during Windows
installation. The driver installation procedures for Windows XP are
described below.
1. Install the chipset driver by extracting and running the
program in ...\Chipset
\Intel_INF_Update_Utility_WinAllOS_v9.0.0.1008.zip.
2. Install the graphics driver and utilities by extracting and run-
ning the program in ...\Graphics
\Intel_Integrated_Graphics_WinXP32_v14383.zip.
3. Install the LAN drivers by extracting and running the program
in …\LAN
\Intel_Network_Adapter_WinXP32_Win2000_Win2003_v14.0.zip.
4. Install the audio driver for RTM cPCI-R6001D by extracting
and running the program in …\Audio\Professional\
Realtek_WDM_Audio_WinXP32_Win2003_v2.21.zip.
We recommend using the drivers provided on the ADLINK
All-in-One CD or downloading them from the ADLINK website to
ensure compatibility. Contact ADLINK to get support for VxWorks
BSP.
NOTE: NOTE:
SCSI is not supported on current model RTMs. If your RTM
supports SCSI, refer to "SCSI Driver" on page 56.