ADLINK PCI-7856 - Manual (Page 42)

30 HSL Slave Modules
PCI-7856 
User’s Manual
4.2.3 DIP Switch Setting
1 2 3 4 5 6
ON
ON = 1
100000 address 1
010000 address 2
… …
011111 address 62
111111 address 63
OFF = 0
Please note the following:
1. The address (or slave index) ‘0’ is reserved.
2. HSL-DI32-M, HSL-DO32-M, HSL-DI32-DB, and HSL-
DO32-DB need two consecutive addresses that start
from an odd number. For example, if the DIP switch is
set as 3, it would occupy slave index 3 and 4.
3. HSL-AI16AO2-M-VV/AV needs two leap addresses at
full duplex mode. For example, if the DIP switch is 2, this
module will occupy 2 and 4.