ADLINK PCM-9112+ - Manual (Page 61)

C/C++ Library • 53
_9112_AD_Set_Mode(CARD_1, AD_MODE_4 );
printf( "Now, The Internal Timer Pacer trigger is set
\n" );
/* All A/D conversion will be trigger by internal timer
pacer, and the converted data should be transfered
in the interrupt service routine. (ISR). */
}
5.11 _9112_AD_Set_Autoscan
@ Description
This function is used to enable or disable an automatic hardware
channel scan. If the PCI-9112 is set as enable mode, then the A/D
channel can be converted automatically, that is, the hardware will
automatically decrement until it reaches channel 0. Then, loop back to
the channel it started from and continue decrementing again. For
example, the channel is set as 4, the A/D conversion sequence will be
4, 3, 2, 1, 0, 4, 3, 2, 1, 0, 4, 3, 2, 1, 0, 4, 3,
If the auto-scan is set to disable, the scan will scan a single channel
only, such as channel 4.
@ Syntax
Visual C++ (Windows-95)
int W_9112_AD_Set_Autoscan (int card_number, int autoscan)
Visual Basic (Windows-95)
int W_9112_AD_Set_ Autoscan (ByVal card_number As Long,
ByVal autoscan As Long) As Long
C/C++ ( DOS)
int _9112_AD_Set_Autoscan (int card_number, int autoscan)
@ Argument
card_number: the card number of PCI-9112
autoscan: TRUE or FALSE
@ Return Code
ERR_NoError, ERR_BoardNoInit
@ Example
See the demo program ‘AD_DEMO4.C'