Dodge 2008 Sprinter - Manual (Page 578)

576
Practical hints
Battery
5
̈ To install: place floor covering 1
into the driver’s footwell.
̈ Push floor covering 1 under the
plate metal bracket of the accelera-
tor pedal and align it with the driver’s
seat base and the doorway
Make sure the floor covering does
not obstruct the accelerator’s range
of movement.
̈ Position trim 2 and screw
screws 3 back in.
Removing the battery cover in the
driver’s footwell
1 Cover
2 Securing screws
̈ Undo screws 2 and slide cover 1
in the direction of the arrow.
The screws must protrude beyond
the recesses.
Warning
G
The movement of the pedals must not be ob-
structed. The vehicle’s operating and road
safety are otherwise jeopardized.
Make sure to push the floor covering under
the plate metal bracket of the accelerator
pedal. The floor covering may not slip bet-
ween the bracket and the accelerator pedal.
Otherwise, you may not be able to fully
depress the accelerator pedal, which will
restrict the vehicle’s acceleration capability,
for example when passing another vehicle.
nf_BA.book Page 576 Friday, January 25, 2008 3:53 PM