Dodge 2008 Sprinter - Manual (Page 568)

566
Practical hints
Flat tire
5
̈ Turn knob c clockwise until the
valve core is firmly screwed into tire
valve e.
̈ Pull knob c out of valve core
extractor a as far as the stop.
̈ Unscrew valve core extractor a
counterclockwise and remove it
from tire valve e .
̈ Screw valve extension 9 onto tire
valve e and tighten.
̈ Screw the valve cap onto valve
extension 9.
After filling with tire sealant
(
୴ page 570).
Twin tires, outer wheel
The tire valve is on the inside of the out-
er wheel and should be horizontal on the
left-hand side of the vehicle for the re-
pair procedure.
Valve tool with handle and turning work-
piece
i
Do not unscrew the valve core ex-
tractor from the tire valve while the
valve core is unscrewed from the tire
valve. Tire sealant could otherwise
escape onto your hands.
The tire sealant is water soluble. If
tire sealant escapes, you can wash it
away with water.
nf_BA.book Page 566 Friday, January 25, 2008 3:53 PM