Dodge 2008 Sprinter - Manual (Page 530)

528
Practical hints
Changing bulbs
5
̈ Press catches 1 down.
̈ Swing housing cover 2 in the direc-
tion of the arrow and remove it.
3 Low-beam headlamps
4 Halogen high-beam headlamps/xenon
headlamp cornering lamp*
̈ Pull the connector off the bulb hold-
er.
̈ Unclip the retainer spring and re-
move the bulb.
̈ Insert the new bulb such that the
base locates in the recess of the bulb
holder.
̈ Clip on the retainer spring and plug
the connector onto the bulb.
̈ Insert housing cover 2 into lower
brackets.
̈ Swing housing cover 2 toward
headlamp casing.
̈ Pull first the inner and then the outer
catch 1 upward until it audibly en-
gages in place.
Turn signals
1 Bulb holder
nf_BA.book Page 528 Friday, January 25, 2008 3:53 PM