To raise, To lower, To adjust the angle – Dodge 2008 Sprinter User Manual
Page 124: Removing the head restraints, Installing the head restraints, Seat heating
122
Controls in detail
Seats
3
̈ To raise: pull the head restraint up
to the desired position.
̈ To lower: press release button 1
and slide the head restraint down to
the desired position.
̈ To adjust the angle: hold the head
restraint by the lower edge and fold
it to the desired position.
Removing the head restraints
̈ Pull the head restraint up as far as it
will go.
̈ Press release button 1 and pull the
head restraint out.
Installing the head restraints
̈ Insert the head restraint so that the
rod with the notches is in the direc-
tion of travel on the left.
̈ Push the head restraint down until it
engages.
The switches for the driver’s and pas-
senger’s seat are on the center console.
1 Normal heating
2 Rapid heating
̈ Switch on the ignition (୴ page 111).
!
CAUTION
Make sure that the head restraint is
reinstalled in such a way that its front
faces in the direction of travel (com-
fort head restraint).
Seat heating*
N54.25-2918-31
nf_BA.book Page 122 Friday, January 25, 2008 3:53 PM