Dodge 2008 Sprinter - Manual (Page 404)

402
Operation
Tires and wheels
4
Rotation pattern for single and dual rear
wheels
Single rear wheels:
̈ Rotate the tires by axle. Never
change the direction of rotation of
your tires.
Warning (Continued)
G
If a wheel hub thread is damaged, you
must not drive the vehicle. Consult an au-
thorized Sprinter Dealer.
Only use genuine wheel bolts approved by
the vehicle manufacturer and specified
for your vehicle’s rims. Check tightness of
wheel bolts or nuts regularly and retight-
en with a torque wrench, if necessary.
Tighten wheel bolts or nuts in a crisscross
pattern. For information on mounting
bolts and tightening torques, refer to "In-
stalling a wheel" (
୴ page 548).
Continued
After changing a wheel, the wheel bolts or
nuts must be retightened after the vehicle
has been driven for about 30 miles
(50 km)
If new or repainted rims are fitted, the
wheel bolts or nuts must be retightened
again after about 600 to 3000 miles
(about 1000 to 5000 km).
nf_BA.book Page 402 Friday, January 25, 2008 3:53 PM