Dodge 2008 Sprinter - Manual (Page 427)

425
Operation
Cleaning and care of the vehicle
4
̈ Clean the display surface with a
commercially-available microfiber
cloth and cleaner for TFT/LCD dis-
plays.
̈ After drying, wipe the display surface
with a dry microfiber cloth using only
slight pressure.
Seat belts
Remove stains or dirt immediately to
prevent damage or the build-up of resi-
dues.
! CAUTION
Do not use dry, coarse or hard cloths,
abrasive material, solvent or solvent-
based cleaning agent. Do not scrub
or use high pressure.
You will otherwise damage the
pressure- and scratch-sensitive dis-
play surface.
! CAUTION
Clean the seat belts with a mild wash-
ing solution. Do not dry the seat belts
in direct sunlight or at temperatures
above 176 °F (80 °C).
! Do not bleach or dye the seat
belts. This could impair the function
of the seat belts.
After driving off-road or on
construction sites
Warning
G
Dirt on the vehicle can affect road and op-
erating safety.
In particular, the following dangers
can arise:
Stone chippings
Stones trapped between the tires can be
thrown out while the vehicle is in motion
and injure other road users or damage their
vehicles (in particular the windshield).
Continued
nf_BA.book Page 425 Friday, January 25, 2008 3:53 PM