beautypg.com

Attaching a trailer – Dodge 2008 Sprinter User Manual

Page 310

background image

308

Operation

Driving tips

4

Attaching a trailer

Please observe the maximum permitted
trailer dimensions (width and length).

Most states and all Canadian provinces
require safety chains between your tow
vehicle and the trailer. The chains should
be crisscrossed under the trailer tongue.
They must be attached to the hitch re-
ceiver, and not to the vehicle’s bumper
or axle. Be sure to leave enough slack in
the chains to permit turning corners.

i

Most states and all Canadian prov-
inces require a separate brake sys-
tem at various trailer weights.

Warning

G

Do not connect a trailer brake system (if
trailer is so equipped) directly to the vehi-
cle’s hydraulic brake system as your vehi-
cle is equipped with antilock brakes. If
you do, neither the vehicle’s brakes nor
the trailer’s brakes will function properly.
This could cause an accident resulting in
property damage, injury or death to you or
others.

The provided vehicle electrical wiring har-
ness for trailer towing has a brake signal
wire for hook-up to a brake controller.

Continued

Warning (Continued)

G

Most states and all Canadian provinces
require a break-away switch on trailers
with a separate brake system. The switch
activates the trailer brakes in the possible
event that the trailer might separate from
the tow vehicle.

You should consider using a trailer sway
control system. For further information,
see your authorized Sprinter Dealer.

nf_BA.book Page 308 Friday, January 25, 2008 3:53 PM