Dodge 2008 Sprinter - Manual (Page 340)

338
Operation
Battery isolating switch*
4
̄ Battery isolating switch*
You can disconnect the current to all
your vehicle’s consumers using the bat-
tery isolating switch. This will prevent
uncontrolled battery discharge caused
by quiescent current consumption.
The battery isolating switch is to the
right of the accelerator pedal in the driv-
er’s footwell.
1 Connector
2 Slide
Warning
G
If the vehicle is equipped with an auxiliary
battery in the engine compartment, it is
necessary to disconnect both batteries
when working on the vehicle electrical
system. Only then is the electrical system
fully disconnected from the power supply.
i
Only disconnect the vehicle electrical
system from the power supply using
the battery isolating switch if the ve-
hicle is to be parked up for a long pe-
riod or when this is absolutely
necessary.
After the power supply is switched
on, you must reset the electric sliding
door (
୴ page 92).
nf_BA.book Page 338 Friday, January 25, 2008 3:53 PM