Dodge 2008 Sprinter - Manual (Page 570)

568
Practical hints
Flat tire
5
c Angle bracket
d Hook
̈ Hook tire sealant valve 8 into the
upper vent hole in the wheel using
hook d.
̈ Press angle bracket c on hose of
tire sealant bottle 8 ( ୴ page 560)
to the stop on tire valve b and
clamp it into place.
̈ Make sure that the pressure release
screw on pressure gauge 5 is
closed.
̈ Connect connector 6 to the 12 V
socket (12 V, 25 A, 300 watts) on
the center console (
୴ page 297).
̈ Start the engine (୴ page 186).
̈ Press I on electric air pump
switch 1.
The electric air pump is switched on.
The tire sealant is then pumped into
the tire and the tire pressure is in-
creased.
! CAUTION
Do not connect the electric air pump
connector to the cigarette lighter
socket or another 12 V socket.
These are not designed for operating
the electric air pump.
nf_BA.book Page 568 Friday, January 25, 2008 3:53 PM