Denso BHT-6000 - Manual (Page 72)

57
Chapter 2. Getting Started the BHT-6000 and System Mode
[4.7] Defining the functions of the shift key and magic keys
SET KEY
1:SHIFT KEY
2:M1 KEY
3:M2 KEY
Selecting the "7:KEY" on the SET SYSTEM menu
calls up the screen shown at left.
Reversed is the current setting.
1 SHIFT KEY: Switches to the shift key defini-
tion screen.
2 M1 KEY: Switches to the M1 key definition
screen.
3 M2 KEY: Switches to the M2 key definition
screen.
Select a desired screen by using the numerical
keys or F5 and F6 keys, and then press the ENT
key.
To return to the SET SYSTEM menu, press the C
key.
SET SHIFT KEY
1:Nonlock
2:Onetime
Selecting the "1:SHIFT KEY" on the SET KEY menu
calls up the screen shown at left.
Reversed is the current setting.
1 Nonlock: Shifts the keypad only when the
SF key is held down.
2 Onetime: Shifts only one key pressed im-
mediately after the SF key is
pressed. (The following keys will
not be shifted.)
Select a desired setting by using the numerical
keys or F5 and F6 keys, and then press the ENT
key. The screen returns to the SET KEY menu.
Defining the function of the shift key