Denso BHT-6000 - Manual (Page 46)

31
Chapter 2. Getting Started the BHT-6000 and System Mode
SYSTEM MENU
1:EXEC PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST 6:VER
DELETE
1:DRIVE A
2:DRIVE B
COPY
1:DRIVE A --> B
2:DRIVE B --> A
JIS 1/JIS 2
1:DELETE
2:DOWNLOAD
3:UPLOAD
In addition to the functions given on the previous page, System Mode has these three
functions: Deleting files, Copying files, and Handling the JIS font files.
To call up these functions, press the 0 , 1 , or 2 key, respectively, while holding
down the SF key when the SYSTEM MENU is displayed.
SYSTEM MENU ⇐ Press the PW key while holding down the
SF and 1 keys.
Handling the JIS Font Files
Deletes, downloads, or uploads the JIS
Level 1 and Level 2 font files.
(Refer to Subsection 2.5.3, [ 9 ].)
Copying Files
Copies a program file or data file
between the RAM and flash ROM.
(Refer to Subsection 2.5.3, [ 8 ].)
Deleting Files
Deletes a program file or data file
stored in the RAM or flash ROM.
(Refer to Subsection 2.5.3, [ 7 ].)
0 with
SF held
down
1 with
SF held
down
2 with
SF held
down