Denso BHT-6000 - Manual (Page 145)

130
During uploading of a program file or
data file
UPLOAD FILE
(A:)
SAMPLE00.PD3
File error !!
Upload? 1:Yes 2:No
■ Problem
The file you attempted to upload is damaged.
■ Solution
To upload the damaged file as is, press the 1 key.
UPLOAD FILE
(A:)
XXXXXXXX.XXX
Communication
error !!
Retry?
1:Yes 2:No
■ Problem
Uploading has failed.
■ Solution
To retry uploading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key.
Check the interface port and communications pa-
rameters in the SET SYSTEM menu or perform the
communications test in the TEST menu. (Refer to
Chapter 2, Subsection 2.5.3, [4.6] and [5.5].)
It is also necessary to check the communications
parameters setup of the host computer.
UPLOAD
JIS 1
Communication
error !!
Retry?
1:Yes 2:No
■ Problem
Uploading has failed.
■ Solution
To retry uploading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key.
Check the interface port and communications pa-
rameters in the SET SYSTEM menu or perform the
communications test in the TEST menu. (Refer to
Chapter 2, Subsection 2.5.3, [4.6] and [5.5].)
It is also necessary to check the communications
parameters setup of the host computer.
During uploading of JIS1/JIS2 font file