2 ] charging only, Charging operation and led indication – Denso BHT-6000 User Manual
Page 158
143
Chapter 5. Handling the CU-6000 (Option)
DATA
CHG2
POWER
CHG1
DATA
CHG2
POWER
CHG1
DATA
CHG2
POWER
CHG1
DATA
CHG2
POWER
CHG1
[ 2 ] Charging Only
(1)
Load a Ni-MH battery cartridge into the CU-6001 from the battery cartridge slot.
(2)
Power on the CU-6001.
The CU-6001 turns on the CHG2 LED and starts charging the cartridge.
After approx. ten hours of charging, the CHG2 LED starts flashing at 2-second
intervals, indicating that the charging is completed.
(3)
Take out the battery cartridge.
■ Charging Operation and LED Indication
Operator's Action
Load a battery cartridge
into the CU-6001.
⇓
Power on the CU-6001.
⇓
After approx. 10 hours
⇓
Take out the battery
cartridge.
CU-6001 Status
Powered OFF
⇓
Ordinary charging
⇓
Trickle charging
⇓
On standby
LED Indication
ON
ON
ON
ON
OFF
Flashing at
2-second
intervals