Denso BHT-6000 - Manual (Page 35)

20
• When driven by the Ni-MH battery cartridge
If either of the above messages appears, immediately turn the power off, and then
charge the Ni-MH battery cartridge or replace it with a fully charged one.
You may charge the Ni-MH battery cartridge with the optional CU-6001 communica-
tions unit or C-600 quick charger. For the charging procedure using the CU-6001, refer
to Chapter 5. For that using the C-600, refer to the "C-600 User’s Manual."
WARNING
Only use the dedicated charger (CU-6001 or
C-600) for charging the Ni-MH battery cartridge.
CAUTION
Never charge a wet or damp Ni-MH battery car-
tridge.
Doing so could cause the batteries to break, gen-
erate heat, rupture or burn.
Charge the
battery!