Denso BHT-6000 User Manual

Page 70

Chapter 2. Getting Started the BHT-6000 and System Mode

[4.6-3]

Setting the interface port

SET COM PORT

1:BASIC

OPT

IFC

2:SYSTEM MODE

OPT

IFC

Selecting the "3:COM PORT" on the SET COM menu
calls up the screen shown at left.

Reversed is the current setting.

1 BASIC:

Selects the optical or direct-
connect interface port to be
used

for user programs

written in BHT-BASIC 3.0
(OPEN "COM:" or XFILE
statement).

2 SYSTEM MODE:

Selects the optical or direct-

connect interface port to be
used

for downloading or

uploading files in System
Mode.

Select a desired item by using the numerical keys
or F5 and F6 keys, and then select a desired
setting by using the F7 and F8 keys.

To return to the SET COM menu, press the C key.