Denso BHT-6000 - Manual (Page 138)

123
Chapter 4. Error Messages
System Program malfunction
■ Problem
During execution of System Program, the System
Program has attempted to write onto the write-
protected area of the RAM.
(xxxxxx: Error address)
■ Solution
Unload and reload the dry batteries or the battery
cartridge, then turn on the power.
Reload the
battery
to restart!
XXXXXX 01
■ Problem
During execution of System Program, the System
Program has received an invalid command code.
(xxxxxx: Error address)
■ Solution
Unload and reload the dry batteries or the battery
cartridge, then turn on the power.
Reload the
battery
to restart!
XXXXXX 02
Flash ROM error
■ Problem
The system has failed to write onto the flash ROM.
If this error occurs, the BHT-6000 beeps five
times (for 0.1 second per beep) and then turns
itself off.
■ Solution
Turn on the power again. If this error occurs fre-
quently, contact your nearest dealer.
NOTE
Flash ROM error!
Contact your
administrator.