Aiwa CSD-ED 57 - Manual (Page 5)

MODE
.REPEAT
► PLAY
■ STOP
BI CD OPERATION
1
2
Press CD.
The power is turned on and the CD indicator lights up.
Press OPEN to open the disc compartment.
Place a disc with the printed side up and
close the disc compartment.
Total number of tracks and total playing time are
displayed.
3
Press *►!! PLAY/PAUSE/PRESET to start
play.
The number of the track being played and elapsed
playing time are displayed.
* or ► PLAY on the remote control (except CSD-
ED37)
■ STOP/MEMORY - Stops play.
*►11 PLAY/PAUSE/PRESET - Pauses play. To resume
play, press again.
* or II PAUSE on the remote control (except CSD-
ED37)
M^,^W SKIP/SEARCH - Searches for a particular point
during playback. Keep or pressed and then
release it.
- Skips to the beginning of a track. Press or
repeatedly.
*REPEAT/FM MODE/OSC - Repeats a single track or all
tracks. Select as follows.
1: A single track is played repeatedly. Select a track
with or ►►!.
CZ: : All tracks are played repeatedly.
’ or REPEAT on the remote control (except CSD-ED37)
To start play when the power is off, press CD. The
power is turned on and play of the loaded disc begins
(Direct Play Function).
If you load a disc while the CD indicator flashes in step 2.
play starts without pressing ►!!.
To select a track directly with the remote control (except
CSD-ED37), press the numbered buttons 0-9 and -rIO. CD
play starts from the selected track and continues to the last
track.
Example:
To select number 25, press -i-10, +10 and 5.
To select number 10, press +10 and 0.
After listening, press POWER Ó STANDBY to turn the
power off.
NOTE
• Do not use irregular shape CDs (example: heart-shaped,
octagonal ones).
It may result in malfunctions.
• Do not place more than one disc in the disc compartment.
• Do not try to open the disc compartment during play.
• Do not touch the lens. Doing so may cause malfunctions.
PROGRAMMED PLAY
Up to 30 tracks can be programmed from the disc.
7
In stop mode, keep *■ STOP/MEMORY
pressed until “M” flashes in the display.
• or ■ on the remote control (except CSD-ED37)
2
Press to select a track, then press
■ STOP/MEMORY to store it.
Track number
3
4
Programmed number
To select a track with the remote control (except
CSD-ED37)
Press the numbered buttons 0-9 and +10.
Repeat step 2 to program other tracks.
Press ►!! to start play.
To check the program, press or in stop mode.
To clear the program, press ■ once in stop mode so that
“M” disappears in the display.
To change the programmed tracks, clear the program and
repeat all the steps again.
ENGLISH 5