Q-See QSDT8PCRC User Manual
Page 68
Error! Use the Home tab to apply
标题
标题
标题
标题 1 to the text that you want to
appear here.
Error! Use the Home
tab to apply
标题
标题
标题
标题 1 to the text that
you want to appear here.
SuperDVR & QSDT8PCRC
User Manual
68
The Alarm setup configuration is show below:
Fig 7.22 Alarm triggering configuration
Option Explanations:
1. Buzzer
Users can select whether to sound the computer buzzer if the alarms have
been triggered also select how long the buzzer sounds.
2. Full screen alarm
Users can select whether channel will be full screen when alarm triggered.
Set the full screen hold time here
3. Pre-alarm record
Users can select whether to enable alarm pre-recording and also pre-record
time
This option is for users to see remote live view.
4. Disk storage alarm
If the Partition’s free space is less than the assigned percentage, it will stop
recording or recycling, but give alarm tips according to the settings
5. Motion holding time
The continuous recording time after motion stopped
6. Sensor holding time
The continuous recording time after sensor stopped
8.5.2 Camera setup
Click
and the camera setup configuration will appear as shown below: