Q-See QSDT8PCRC - Manual (Page 18)

Error! Use the Home tab to apply
标题
标题 标题 标题 1 to the text that you want to
appear here.
Error! Use the Home
tab to apply 标题 标题 标题 标题 1 to the text that
you want to appear here.
SuperDVR & QSDT8PCRC
User Manual
18
4.3 Record
4.3.1 Record Modes
According to different record triggering methods, video capture cards offer
users 4 different record modes:
• Schedule record mode (timer)
• Manual record mode
• Motion Detection record mode
• Sensor Alarm record mode
Motion Detection record mode and Sensor Alarm record mode are called
Alarm Record.
If users use multiple cameras to record, every camera works separately and
the recorded files are also saved separately. The parameters, i.e. camera ID,
record date/time, and record mode are all saved together with the recorded
file.
4.3.2 Record Setup
Figure4-5 Record Configuration Panel
In the ‘ Record Panel’ of the Basic Configuration page, users can set all the
necessary parameters for recording.
1. Time Stamp
By selecting this option, the record date / time message appears in the
recorded file images.
2. Switch
By selecting this option, users can turn on corresponding cameras. If there is
no camera on a channel, do not select this option and you will save system
resources.
3. Manual Record
By selecting this option, the images from the selected camera will be recorded
and saved all the time (24 hour recording).