Q-See QSDT8PCRC - Manual (Page 28)

Error! Use the Home tab to apply
标题
标题 标题 标题 1 to the text that you want to
appear here.
Error! Use the Home
tab to apply 标题 标题 标题 标题 1 to the text that
you want to appear here.
SuperDVR & QSDT8PCRC
User Manual
28
Figure5-8 Edit Schedule
5.5 Motion Detection Alarm Configuration
5.5.1 Alarm Triggering Conditions Configuration
The system can receive alarms from both local place and network.
Local Alarm Record Triggering Configuration
Figure5-9 Local Alarm Triggering Configuration
Explanation of options:
1. Buzzer
Users can select whether to trigger the computer buzzer if alarms have been
triggered and also select how long the buzzer sounds.
2. Pre-Alarm Record
Users can select whether to enable alarm pre-record and also pre-record
time.
3. Big Screen Holding Time
The corresponding channel will be full screen when an alarm is triggered. Set
the full screen hold time here.
4. Motion Holding Time
How long the recording continues after motion stops.
5. Sensor Holding Time
How long the recording continues after sensor stops.
6. Disk Shortage Alarm
If the Partition free space is less than the set percent, it will stop recording or
recycling, but give alarm tips according to the settings.