Aiwa CSD-SL15 - Manual (Page 5)

Use Type I (normal) tapes only.
PLAYING A TAPE
1
2
Set FUNCTION to TAPE.
Press M/± STOP/EJECT to open the cassette
holder and insert a tape with the exposed side
out and the side to be played up.
3
Press ► PLAY to start play.
4
Turn VOLUME and BASS» to adjust the sound.
m/±
STOP/EJECT - Stops play.
II PAUSE - Pauses play. To resume play, press again.
►► F FWD/"<^ REW - Fast forwards/rewinds. To stop
winding, press U/± STOP/EJECT.
RECORDING
Note that recording is done on only one side of the tape.
1
Insert a tape with the side to be recorded facing
up.
Wind up the tape to the point where recording starts.
2
Get ready to record from the source.
To record from a CD: set FUNCTION to CD and start
play.
To record from the tuner: set FUNCTION to RADIO and
tune to a station.
3
Press # REC to start recording.
► PLAY is pressed simultaneously.
To stop recording, press W/±. STOP/EJECT.
To erase a recording, set FUNCTION to TAPE and start
recording.
To prevent accidental erasure, break off the plastic tabs on
the cassette tape after recording with a screwdriver or other
pointed tool.
To record on the tape again, cover the tab openings with
adhesive tape, etc.
Side A
Tab for side A
If an erroneous display or malfunction occurs
Disconnect the AC cord and remove all the batteries to turn
off the display. Then turn the power back on.
ENGLISH 5