Graphic equalizer, Basic operatio, Press one of rock, pop or classic – Aiwa CX-NA222 User Manual
Page 8: To cancel the selected mode, To select with the remote control, Using the headphones, 2 press ► to start play, Basic operations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TAPE PLAYBACK
GRAPHIC EQUALIZER
GRAPHIC EQUALIZER
PHONES
GEQ
■SHIFT
BASIC OPERATIO
kiMf
■MULTI JOG
■^PUSH
EJECT
■ Deck 2
This unit provides the following three different equalization curves.
ROCK:
Powerful sound emphasizing treble and bass
POP:
More presence in the vocals and midrange
CLASSIC:
Enriched sound with heavy bass and fine treble.
Press one of ROCK, POP or CLASSIC.
The selected equalization mode is displayed.
k
: : :
.‘■V ,
! V ;
i i
j
i ;
■;;k
To cancel the selected mode
Press the selected button again. “GEQ OFF” is displayed.
To select with the remote control
Press
GEQ
repeatedly while pressing
SHIFT.
The GEQ mode is
displayed cyclically as follows.
ROCK-
POP-
CLASSIC-
GEQ OFF —I
(cancel)
Using the headphones
Connect headphones to the
PHONES
jack with a standard stereo
plug (
06.3 mm, V4 inch).
No sound is output from the speakers while the headphones are
plugged in. .
Sound adjustment during recording
The output volume and tone of the speakers or headphones are
freely varied without affecting the recording.
8
ENGLISH
This unit is designed for optimai playback of Type i
(normal) tapes.
1 Press TAPE and press ± PUSH EJECT to open
the cassette holder.
APUSH
EJECT
Insert a tape with the exposed side down. Push the cassette
holder to close.
2 Press ► to start play.
Only the side facing out from the unit can be played back.
Selected deck number Tape counter
To select a playing deck
When tapes are loaded in both decks, press
TAPE
first to select
a deck.
The selected deck number is displayed.
To stop play,
press ■.
To pause play (deck 2 only),
press
II
. To resume play, press
again.
To fast forward or rewind,
press or Then press ■
to stop the tape.
To start play when the power is off (Direct Play Function)
Press
TAPE.
The power is turned on and play of the inserted
tape begins.
To set the tape counter to 0000
Press B CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
When tapes are loaded in both decks
After playback on deck 1 finishes, the tape in the deck 2 will start
to play without interruption and will stop at the end of the tape.
(Continuous play)
Type II (High position) tapes can also be played back in this
unit. When playing back a Type II tape, turn
MULTI JOG
to display
“SOFT” in the display. This will set the optimum playback sound
for Type II tapes. However, “SOFT” playback will be canceled if
any graphic equalizer is selected (page 8), the unit is switched
to a different audio source, the cassette holder is open, or when
the power is turned off.