Aiwa CT-X417 - Manual (Page 16)

SPECIFICATIONS
RADIO SECTION
(FM)
Frequency Range: 87.5 MHz - 108 MHz
(100 kHz step)
Usable Sensitivity: 12.7dBf
50 dB Quieting Sensitivity:
17.2 dBf
IF Rejection: 80 dB
Frequency Response: 30 Hz - 15,000 Hz
S/N Ratio: 63 dB
Stereo Separation: 35 dB at 1 kHz
Aiternate Channel Selectivity:
70 dB
Capture Ratio:
(AM)
Frequency Range:
Usable Sensitivity:
3dB
520 kHz-1,720 kHz
(to kHz step)
30 pV (30 dB)
TAPE SECTION
Wow/FI utter:
Tape Speed:
S/N Ratio (normal):
Frequency Response: 40 Hz - 14,000 Hz
Stereo Separation: 40 dB
FF/REW Time: 180 sec. (C-60)
0.1% (WRMS)
4.8 cm/sec. (1 '’/s ips)
50 dB
AUDIO SECTION
Max. Power Output: 40 W x 4 oh.
AUX input
Input sensitivity (load impedance)
AUX: 500 mV (10 kQ)
GENERAL
Power Supply Voltage;
14.4 V (11 to 16 V allowable),
DC, negative ground
4£2
Bass ± 10 dB at 100 Hz
Treble ± 5 dB at 10 kHz
Pre-amp Output Voltage:
500 mV (min.)
182(W)x53 (H)x 155(D) mm
(7 ’/4 (W)
X
2 Vs (H)
X
6 Vs (D)
inches)
Carrying case (1)
Load Impedance:
Tone Control:
Installation size:
Accessory supplied;
•Specifications and externai appearance are
subject to change without notice due to product
improvement.
EN
16