7 press mode twice in stop mode, 3 repeat step 2 to program other tracks, 4 press ► to start play – Aiwa CA-DW635 User Manual
Page 9: To check the program, To clear the program, To add tracks to the program, To change the programmed tracks, Bibi3m3bammed play, I _l, Vj.i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EEEEAT PyyC,
One track, all the tracks or programmed tracks can be played
repeatedly.
Press REPEAT on the remote control to display REPEAT
ALL or REPEAT 1.
To repeat all the tracks, display REPEAT ALL.
To repeat the current track only, display REPEAT 1.
To cancel repeat play, press REPEAT to turn off REPEAT.
To repeat the desired tracks only, program the tracks and
press REPEAT to display REPEAT ALL.
All the tracks on the disc can be played randomly.
Press MODE once on the remote control in stop mode to
display
“ r R n ” .
Press ► to start play.
VOL
I c
I _l
_
l-l
_
/
I
1 1
I
To cancel random play, press MODE repeatedly in stop
mode until the total play time display is restored.
NOTE
Even if the ◄◄ button is pressed, a previously played
track cannot be skipped. The unit returns to the beginning
of the current track only.
During random play, one-track repeat (REPEAT 1) cannot
be performed.
If you select tracks with the numbered buttons, random
play is canceied.
Up to 30 tracks can be programmed from the inserted disc.
BIBI3M3BAMMED PLAY
1
2
Use the remote control.
7
Press MODE twice in stop mode.
PRG flashes on the display.
SBsVil
PRG
VOL
V
J.I
I i . l I I I
U . U L I
Press the numbered buttons 0-9, +10 to
program a track.
Example:
To select the 12th track, press +10 and 2.
To select the 20th track, press +10, +10 and 0.
Program number
Total playing time of
the selected tracks
Selected track number
[
3
]
■'«" 131
I C . I 3
I U. I J
Total number of
selected tracks
3
Repeat step 2 to program other tracks.
4
Press ► to start play.
To check the program
Each time ◄◄ or ►► is pressed in stop mode, a track
number and program number wili be displayed.
To clear the program
Press MODE in stop mode.
To add tracks to the program
In stop mode, repeat step 2. The track will be programmed
after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
NOTE
If the programmed time is more than 99:59 minutes, or the
disc track number being programmed is 31 or above, the
dispiay shows -
- as the total playing time.
ENGLISH
9