Inserting batteries, When to replace the batteries, Using the remote control – Aiwa CA-DW635 User Manual
Page 5: To use the function button, To turn the power on, After use, U sing the headphones, Remote control before operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

REMOTE CONTROL
BEFORE OPERATION
Inserting batteries
Detach the battery cover on the rear of the remote control
and insert two R6 (size AA) batteries.
When to replace the batteries
The maximum operational distance of the remote control
should be approximately 5 meters (16 feet). When this
distance decreases, replace the batteries with new ones.
Using the remote control
The instructions in this manual refer mainly to the buttons on
the main unit. Buttons on the remote control with the same
names as those on the main unit can be used as well.
To use the FUNCTION button
The FUNCTION button substitutes for the FUNCTION
buttons (CD, AUX, TUNER/BAND, TAPE) on the main unit.
Each time FUNCTION is pressed while power is on, the next
function is selected cyclically.
If the unit is not going to be used for an extended period of
time, remove the batteries to prevent possible electrolyte
leakage.
The remote control may not operate correctly when:
- The line of sight between the remote control and the unit
is exposed to intense light, such as direct sunlight
- Other remote controls are used nearby (television, etc.)
To turn the power on
Press one of the FUNCTION buttons (CD, AUX, TUNER/
BAND, TAPE). Play of the inserted disc or the previously
tuned station is received (Direct Play Function).
POWER is also available.
After use
Press POWER to turn off the power. The display changes to
the clock.
NOTE
When using on the batteries, you cannot turn the power on
with the remote control.
U sing the headphones
Connect headphones to the PHONES jack with a stereo mini
plug (03.5 mm. V s inch).
No sound is output from the speakers while the headphones
are plugged in.
ENGLISH
5