Selecting a preset station on the main unit, To clear a preset station, Presening stations – Aiwa CA-DW635 User Manual
Page 7: Rbeset number tuning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PRESEniNG STATIONS
PRESET
• CLEAR
The unit can store a total of 24 preset stations for FM and
AM. However, up to 16 stations can be preset for each band.
When a station is stored, a preset number is assigned to the
station. Use the preset number to tune in to a preset station
directly.
1
2
Press TUNER/BAND to select a band. Then,
press ◄◄ DOWN or ►► UP to select a station.
Press 11 SET to store the station.
A station is assigned a preset number, beginning from 1
in consecutive order for each band.
Preset number
_ .
. I I I , i
prg
L \o ~I C n ^
V O L I I I LU_/. _nUMHzJ_ .
^ I |l 7 ^
Frequency
3
Repeat steps 1 and 2.
Use the remote control to select the preset number directly.
RBESET NUMBER TUNING
BAND
•0-9,+10
1
2
Press BAND to select a band.
Press the numbered buttons 0-9, +10 to select a
preset number.
Example:
To select preset number 15, press +10 and 5.
To select preset number 10, press +10 and 0.
Selecting a preset station on the main unit
Press TUNER/BAND to select a band. Then, press ■
PRESET repeatedly.
Each time the button is pressed, the next highest number is
selected.
To clear a preset station
Select the preset station to be cleared. Then, press II SET,
and press ► CLEAR within 4 seconds.
The preset numbers of all other stations in the band with
higher numbers are also decreased by one.
During operation II, ■ and ► on the remote control are
also available instead of II SET, ■ PRESET and ►
CLEAR on the main unit respectively.
ENGLISH
7